ctrl+x, ctrl+y, ctrl+z behaviour not consistence with ctrl+0 (zero)

Jolbas@jolbas

114 Posts

#1 · February 17, 2021, 10:47 pm

Pressing ctrl+0 (zero) activates temporary offset but ctrl+x is saving to current work offset. I don't know if this is a bug or feature but for me it's confusing.

Breezy@breezy

1,100 Posts

MASSO Support

#2 · February 17, 2021, 11:49 pm

@jolbas

Do you mean Ctrl + O or Ctrl + ALT + O as CTRL + O is Optional Stop Off/On whereas CTRL + ALT +O is Zero all axes.

As of v4.0 zeroing any axis sets the MCS value into the relevant/current G5x axis on the F4 screen.

Regards,

Arie.

Jolbas@jolbas

114 PostsTopic Author

#3 · February 18, 2021, 12:01 am

@breezy

I mean ctrl+zero. Both ctrl+zero and ctrl+alt+zero sets the temporary offset instead of the working offset. This may be an G2 issue.

Breezy@breezy

1,100 Posts

MASSO Support

#4 · February 18, 2021, 1:36 pm

@jolbas

What version of software are you running on the G2?

Regards,

Arie.

Jolbas@jolbas

114 PostsTopic Author

#5 · February 18, 2021, 5:12 pm

@breezy

Plasma 4-axis v3.49, WiFi

MASSO Support@masso-support

2,654 Posts

MASSO Support

#6 · February 19, 2021, 10:02 am

Thanks @jolbas

Tested the CTRL + ALT + 0 and confirmed the behavior you describe.
I have written up a fault ticket for this to be investigated.

Cheers Peter

Jolbas@jolbas

114 PostsTopic Author

#7 · February 19, 2021, 11:47 pm

Thanks Peter