New owner of Masso Touch
Hello,
I'm a newbie in the world of CNC, I building a german Kit from SOROTEC company, a Compact Line 605 and I chose a masso Touch for controlling it.
I'm mostly interested in milling wood as electric guitar luthier, but also Aluminium and steel time to time.
I've been Working on Fusion 360 for a few month which is not too hard for me, I'm former french architect working for more than 30 years on cad and 3D software.
My problem is that I'm totally useless at electronic and I working hard, triyng to understand the whole picture and the details of each component.
I' ve a question about VFD connection in the Masso touch controller, how is the wiring and what kind of parameters I have to set up.
The manual is there :
Thanks a lot for your help
Warm regards
@jlrumeau
Connections as follows
- MASSO 1 > 10v in 4
- MASSO 5 > Fwd 8
- MASSO 7 > Rev 9
- MASSO 4&6 > Gnd 7
- MASSO/Power supply > Gnd 7
Parameters Pn03 > 4
Please watch and follow each step outlined in the video. DONOT jump steps as you will have problems setting up MASSO & VFD.
Regards,
Arie.
Hi,
thanks a lot for your help
best regards