Forum Navigation
Forum breadcrumbs - You are here:ForumForums: Tool ChangersRadial tool changer
You need to log in to create posts and topics.

Radial tool changer


I have an EMCO VMC100 that uses a radial tool changer I don't think that the logic for the umbrella tool changer will work as the tool rotation is done by the spindle motor but I think it could be modified to work with out a huge amount of work.

Interested to see if any one else has one of these machines


Uploaded files:
  • 20191208_093112.jpg
  • 20191215_230713.jpg
  • 20191215_230721.jpg
  • 20191215_231711.jpg

here are the sections from the service manual that explain the tool change process

this is a video from a guy that worked out the logic for a Mach conversion some one did



Uploaded files:
  • Tool-change-Procedure-1.JPG
  • Tool-change-Procedure-2.JPG
  • Tool-change-Procedure-3.JPG
  • Tool-change-Procedure-4.JPG
  • Tool-change-Procedure-5.JPG