Forum Navigation
Forum breadcrumbs - You are here:ForumGeneral: IntroductionsTaking the PLUNGE
You need to log in to create posts and topics.

Taking the PLUNGE

12

Shane,

I found a Mach3 post processor for TurboCAD CAM plugin, had a quick look at it and it shouldn't be to hard too modify it to produce correctly formatted Gcode for MASSO.

But reading TurboCAD's website, it seems that the post processor can be "adjusted" from within the plugin.

Regards,

Arie.

ok.

so worth taking a step forward with turbocad/turbocad CAM/MASSO

now the motors

thanks

12